How to care for your uvex safety gloves

Follow these tips on how to care for and maintain your uvex mechanical safety gloves hygienically and safely, making sure you remove them correctly and wash and store them appropriately.

Glove care refers not only to laundering but also proper storage, routine glove checks, and knowledge of materials and their particular strengths and weaknesses. Glove life varies depending on the application, environment, and amount of use. It is vital that you perform routine glove checks before beginning work every day. Laundering removes harmful chemicals, perspiration, and everyday grit and grime that can weaken protective fibers and seams.

1. Prior to use, check the gloves to ensure there is no damage, e.g. holes, incisions. If faulty, damaged or if showing signs of heavy abrasion - gloves must not be used. Replace as necessary.
2. Make sure you have the correct size.
3. After use: pull gloves inside out from the wrist to keep any contaminant contained.
4. Wash hands thoroughly and sanitise.
5. Ideally put a fresh pair of gloves on each time.
6. Discard or store appropriately until they are worn again or can be laundered.
7. Launder all pairs at the end of the day and allow to air dry.
8. Wash and sanitise hands after handling soiled gloves.

Correct removal of gloves

Pinch the glove at the wrist area and lift it away from the skin - without touching your skin.

Peel the glove down towards your fingers allowing it to turn inside out. This traps any contaminant inside the glove.

Once the glove is off, hold it in a ball in the remaining gloved hand.

To remove the second glove, slide your fingers inside the wrist without touching the outside of the glove.

Peel it off towards your fingers from the inside, turning inside out as you go, folding and encasing it around the other glove.

Discard or store appropriately. Gloves should be stored in clean, dry conditions, away from direct sunlight and extreme temperatures.

Need any advice or help?

Complete the form below and we’ll be in touch.

Laundering

For hygiene and environmental reasons, gloves can and should be laundered after use depending on the level of wear. Gloves with heavy abrasion or damage should be disposed of. Do not use any chemicals or sharp-edged objects for cleaning the gloves (wire brushes, abrasive paper). The following uvex gloves can all be washed at 40ºC.

Cut protection
uvex D500 M foam uvex C500 XG uvex C500 foam uvex C500 wet uvex C500 wet plus uvex C500 dry uvex C500 uncoated uvex C500 sleeve	uvex D500 M foam uvex C500 XG uvex C500 foam uvex C500 wet uvex C500 wet plus uvex C500 dry uvex C500 uncoated uvex C500 sleeve

Mechanical protection
uvex rubipor ergo uvex rubipor XS uvex profi ergo uvex profi XG uvex phynomic lite uvex phynomic foam uvex phynomic allround uvex phynomic wet	uvex phynomic XG uvex phynomic pro uvex phynomic C3 uvex unipur 6631 uvex unipur 6634 uvex unipur 6639 uvex unipur carbon uvex unilite 7700